The multi-cylinder hydraulic cone crusher of Fote is a kind of efficient cone crusher, which can be used to process various hard rocks, and solid waste, and so on. With the advance in recent years, it has been regarded as the first choice among all the cone crushers by clients. The service life of it can be prolonged by some simple operation tricks.
For its lamination crushing principle, the material should be fed into it evenly and fill up the crushing cavity. The feeding amount is large. Thus, at the time of the maintenance and usage, there should be a buffer in front of the machine to guarantee the continuous feeding to the cone crusher. The feeding amount should be accurate and can be adjusted and controlled. A frequency conversion feeding device can be installed.
The feeding and discharge are also the major elements affecting the effect and service life of the machine. There should be a center feeding device. The discharge of the machine should run well. The stack of the material at the bottom of the machine, because the material is too wet, too much, or of lot of powder, should be prevented, which may damage the equipment.
The allocation of the conveyor belt is related to the operation of the cone crusher. The belt conveyor should be equipped with the iron removing device to protect the machine. A non-return device should be installed.
Because the minimum outlet of the multi-cylinder hydraulic cone crusher does not determine the minimum final particle size, in the test time, it should be guaranteed that the machine is full of the material firstly then the outlet size can be adjusted according to the machine load.
It is the Mid-autumn Festival, which is a traditional festival in China. Thank you for having concerned and supported Fote Heavy Machinery for a long time. We wish our new and old clients and friends a happy Mid-autumn Festival!
