January 02, 2016

Some Influential Elements of the Efficiency of the Raymond Mill

the humidity of the material should be considered because the material with too much moisture may stick to the grinding roll or the grinding ring, which make it more difficult for the Raymond mill to be in a normal operation.

December 30, 2015

The Jaw Crusher of Fote Heavy Machinery

jaw crusher is used to conduct the coarse or secondary crushing process of materials of various hardness. It is used to squeeze and bend the material with its two jaw plates.

December 27, 2015

The Influential Elements of the Flotation Separation Process

With the rapid development of the society, the demand of mineral is increasing. The development of the mineral separation technique directly affects the development prospect of the mineral processing industry.

December 25, 2015

How to Select the Cone Crusher of High Cost Performance

What is the selection standard of a cone crusher manufacturer? There are some common standards, including the price of the cone crusher, the quality of it, its performance, the after-sale service, and so on.

December 22, 2015

The Application of Crushing Machines in Concrete

The quality and the operational method are the key elements of the quality of the gravel. Now, we will introduce the crushing machines of Fote to you.

December 20, 2015

Seven Tricks of the Selection of the Wood Chipper

It is very hard for the consumers who lack the professional knowledge of the wood chipper. We have a good knowledge of the wood chipper.

December 18, 2015

The Maintenance and Usage of the Hammer Crusher

The hammer crusher breaks the material with the high-speed rotating hammerheads. Therefore, it should be strict with the installation of the base and the rotating shaft.

December 16, 2015

The Features of the Sand Washing Machine of Fote Heavy Machinery

The service life of the polyurethane sieve of the vibrating screen is much longer than that of the sieves of other types. Besides, this kind of sieve does not get stuck.

December 12, 2015

How to Select the Cost-effective Fine Crusher?

You should have the experience in the usage of a fine crusher and have known well about the working principle, structure, especially the combination of the parts and the property of this machine.

December 09, 2015

The Common Problems and Solutions of the Shaking Table

To find a piece of waste steel or sheet iron to plug it into the dowel of the big pulley and to fasten the set screws which are next to it. Then, it should be checked whether the gap is eliminated.

December 06, 2015

The Importance of the Gravel Crusher in the Cement Production Line

Gravel is a kind of building material. The ferrosilicon block inside the carbide slag can be removed by water. Through the settling, the water in the up layer is discharged.

December 03, 2015

The Drying Power of the Sand Dryer

The total power is the percentage of the removed dust volume with the dryer and the fed dust volume from the inlet of the dryer at the same time, which can also be called even power.

December 01, 2015

The Operation Tips about the Roll Crusher of Fote

there are also some things to notice. We, Fote Heavy Machinery, will present these operation tips for you, which are as follows:

November 29, 2015

The Application Concept of the Ball Mill in the Mineral Processing Line

The ball mill can dry or wet grind a variety of ores. It is widely used in many fields, such as the cement industry, the new-type building material, the refractory material, and so on.

November 27, 2015

The Development Trend of the Dry Mortar Production Line

In our country, dry mortar belongs to an emerging industry, which is regarded as a new building coating. In recent years, the dry mortar industry in China has developed a lot.

November 25, 2015

The Installation and Maintenance of the Toothed Crusher

There is a vibratory unit of the toothed crusher pump. In the time of the installation or before the test-run of the toothed crusher, all the fasteners should be fastened well.

November 22, 2015

The Dust-removing Equipment in Our Country

The competition will be more fierce correspondingly, which will play an active role in the development of the dust-removing equipment in China.

November 20, 2015

The Brief Introduction of the Lime Production Line

We will offer you the complete flow of the pre-sale, sale, after-sale service, including the test-run of the limestone crushing system and the training of the workers.

November 18, 2015

The Reason Why the Material Falls out of the Bucket Elevator

The bucket elevator, as a main equipment in the mineral processing line, may be of the problem that, in the transport process, the material may fall out of it.

November 16, 2015

The Usage and the Maintenance of the Metal Shredder

In production process, the material should be fed into the machine evenly, which can guarantee the quality of the final product and the normal production.